Hello,
We are using IT Edition v3.3.0.16.
I've taken an image of a drive and no errors were reported. On verification of the image, I have the following log:
24-Oct-2008 04:52:06 sptask 110 Worker thread has started
24-Oct-2008 04:52:06 sptask 111 sbrun -mdn ( sbfile -r \\?\F:\Adil.spf : sbcrypt : sbrest )
24-Oct-2008 04:52:06 (loader) 112 corelogic version: 3.3.0.214
24-Oct-2008 04:52:06 sbfile 101 successfully opened file \\?\F:\Adil.spf
24-Oct-2008 04:52:06 sbcrypt 109 filter started
24-Oct-2008 04:52:06 sbcrypt 107 image compression mode: 6
24-Oct-2008 04:52:06 sbcrypt 107 image encryption mode: 0
24-Oct-2008 04:52:06 sbrest 109 image created at 24-Oct-2008 03:56:40 GMT-8:00
24-Oct-2008 04:52:06 sbrest 109 imaged volume had 370474902 sectors, 512 bytes each
24-Oct-2008 04:52:06 sbrest 109 image GUID {A86F731B-2B67-457D-B562-3918157A5760}
24-Oct-2008 04:52:06 sbrest 109 image has no comment
24-Oct-2008 04:52:06 sbrest 109 mount point GUID of the original volume: {958176C4-A1C2-11DD-8C4D-806E6F6E6963}
24-Oct-2008 04:52:06 sbrest 109 original disk C/H/S = 25841/240/63 partition #1
24-Oct-2008 04:52:06 sbrest 109 image created on:
24-Oct-2008 04:52:06 sbrest 109 - OS version 6.00 build 6000
24-Oct-2008 04:52:06 sbrest 109 - machine MINWINPC (0.0.0.0) MAC 00:00:00:00:00:00
24-Oct-2008 04:52:06 sbrest 109 - corelogic version 3.3.0.214
24-Oct-2008 04:52:06 sbrest 109 - mount point list: C:\
24-Oct-2008 04:52:06 sbrest 107 partition type for a target: 7
24-Oct-2008 04:55:59 sbfile 505 \\?\F:\Adil.spf: Chunk too long
24-Oct-2008 04:55:59 sbfile 500 Invalid input data format
24-Oct-2008 04:55:59 sbfile 109 fini done
24-Oct-2008 04:55:59 sbcrypt 500 Unexpected end of the image file
24-Oct-2008 04:55:59 sbrest 500 Unexpected end of the image file
24-Oct-2008 04:55:59 sbcrypt 109 fini done
24-Oct-2008 04:55:59 sbrest 109 fini done
24-Oct-2008 04:55:59 (loader) 504 Final error (-1392 Invalid data format.)
24-Oct-2008 04:56:00 sptask 516 sbrun.exe started successfully but failed to complete the task
When I try to restore the image I get the following log:
24-Oct-2008 05:51:11 group 110 The new layout for disk Hitachi HTS722020K9SA00 was set
24-Oct-2008 05:51:11 group 110 Waiting for volumes to be discovered
24-Oct-2008 05:51:11 group 110 Starting restore operations
24-Oct-2008 05:51:11 sptask 110 Worker thread has started
24-Oct-2008 05:51:11 sptask 111 sbrun -mdn ( sbvol -fl \\?\Volume{578c4ec4-a1d2-11dd-9688-806e6f6e6963} : sbrest \\?\Volume{578c4ece-a1d2-11dd-9688-9ed7a68749e9} )
24-Oct-2008 05:51:11 (loader) 112 corelogic version: 3.3.0.214
24-Oct-2008 05:51:11 sbvol 109 free space exclusion on
24-Oct-2008 05:51:11 sbvol 109 volume will be locked read/only during backup
24-Oct-2008 05:51:11 sbvol 101 successfully opened volume \\?\Volume{578c4ec4-a1d2-11dd-9688-806e6f6e6963}
24-Oct-2008 05:51:11 sbvol 107 FAT system area sectors: 0
24-Oct-2008 05:51:11 sbvol 112 file \\?\Volume{578c4ec4-a1d2-11dd-9688-806e6f6e6963}\pagefile.sys excluded OK
24-Oct-2008 05:51:16 sbrest 404 Cannot open file \\?\Volume{578c4ece-a1d2-11dd-9688-9ed7a68749e9} (-2 The system cannot find the file specified.)
24-Oct-2008 05:51:16 (loader) 504 Final error (-2 The system cannot find the file specified.)
24-Oct-2008 05:51:16 sbvol 109 fini done
24-Oct-2008 05:51:16 sptask 516 sbrun.exe exited with error "Initialization failed"
I've tried this several times. I also checked my HD for errors using WinXP scan disk and a Lenovo BIOS utility - no errors.
What do these error mean?
Thank you,
Max